dc.contributor.author | Njoroge, K. D | |
dc.contributor.author | Mutuli, S. M | |
dc.contributor.author | Kihiu, J. M | |
dc.date.accessioned | 2013-08-08T13:29:33Z | |
dc.date.available | 2013-08-08T13:29:33Z | |
dc.date.issued | 2012 | |
dc.identifier.citation | Njoroge K. D., Mutuli S. M. and Kihiu J. M. (2012). An Intrinsic Dislocation Density – Finite Element Formulation Of Metal Plasticity. IJCER, Vol. 2, Issue No.3, 843-850 | en |
dc.identifier.uri | http://erepository.uonbi.ac.ke:8080/xmlui/handle/123456789/55558 | |
dc.identifier.uri | http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.412.4039&rep=rep1&type=pdf | |
dc.description.abstract | A computational model was developed to simulate elastic and plastic behavior in Body Centered Cubic (BCC) metals and
alloys. The model provided for simultaneous simulation of the micro and macro length scales and used periodicity to link the
two length scales. The model was implemented in a 3dimensional framework giving rise to a finite element technique
incorporating intrinsic dislocation information in the simulation of the material’s behavior. The technique was validated by
simulating loading over the elastic range and the immediate region beyond yield, of thin steel strips, and comparing the results
to those obtained by conventional analysis. Stress-strain curves and slip plane percentage contribution factors were generated.
Specifically the stress-strain curves generated upheld Hooke’s law and demonstrated a definite yield plateau followed by
material recovery after yielding. | en |
dc.language.iso | en | en |
dc.title | An Intrinsic Dislocation Density – Finite Element Formulation Of Metal Plasticity | en |
dc.type | Article | en |
local.publisher | School of Mechanical, Manufacturing and Materials Engineering, Jomo Kenyatta University of Agriculture and Technology | en |
local.publisher | School of Engineering, University of Nairobi | en |