Show simple item record

dc.contributor.authorOdira, Patts M. Akumu
dc.date.accessioned2013-04-17T07:20:10Z
dc.date.available2013-04-17T07:20:10Z
dc.date.issued2004
dc.identifier.citationJournal of Civil Engineering Research and Practiceen
dc.identifier.urihttp://erepository.uonbi.ac.ke:8080/xmlui/handle/123456789/16209
dc.description.abstractThe high cost of conventional building materials is a major factor affecting housing delivery in Nigeria. This has necessitated research into alternative materials of construction. This paper presents the results of an investigation carried out on the comparative cost analysis and strength characteristics of concrete produced using crushed, granular coconut and palm kernel shells as substitutes for conventional coarse aggregate in gradation of 0%, 25%, 50%, 75% and 100%. Two mix ratios (1:1:2 and 1:2:4) were used. A total of 320 cubes of size 100×100×100 mm were cast, tested and their physical and mechanical properties determined. The results of the tests showed that the compressive strength of the concrete decreased as the percentage of the shells increased in the two mix ratios. However, concrete obtained from coconut shells exhibited a higher compressive strength than palm kernel shell concrete in the two mix proportions. The results also indicated cost reduction of 30% and 42% for concrete produced from coconut shells and palm kernel shells, respectively. Considering the strength/economy ratio, it was concluded that coconut shells were more suitable than palm kernel shells when used as substitute for conventional aggregates in concrete production.en
dc.language.isoenen
dc.source.urihttp://www.ajol.info/index.php/jcerp/article/view/29176
dc.titlePerformance of Crushed Coconut Shell Dual Media Filter Paper.en
dc.typeArticleen


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record