Development of solid catalyst for transesterification of croton megalocarpus hutch oil in biodiesel production and blending with kerosene
Abstract
The accelerating and frequently fluctuating price of conventional diesel, together with
growing environmental concerns has sparked renewed attention on the search for alternative
fuel. The awareness of the toxic effects related to the tailpipe emissions of vehicle has driven
many countries to look for a less-polluted transportation fuel.
In this regard, biodiesel (alkyl esters) from vegetable oils or animal fats via transesterification
is a catalyzed process and, traditionally, homogenous catalysts are employed. However, this
type of catalyst is not able to be re-used and requires tedious washing and separating steps,
hence, stimulating the conception of heterogeneous-catalyzed transesterification.
Despite the success of various heterogeneous catalysts, many are not viable for wide
industrial usage as most of the catalysts are expensive and need additional preparation effort.
Among them CaO seems to have a promising place and the increasing research on CaO is
self-evidence of its capability in catalyzing the reaction.
Therefore, in this research CaO obtained from eggshell is employed as a catalyst in carrying
out transesterification of Croton Megalocarpus Hutch oil and methanol. Methyl esters
obtained were characterized by FT-IR and GC–MS and further tested for fuel properties with
kerosene blend.
The results showed methyl hexadecanoate and methyl octadecanoate were common fatty
acids esters both in CaO and KOH catalyzed reactions. Total unsaturation was highest for
Croton ester with 68.0%. The esters viscosities at 40 °C were in the range of 4.16 - 4.63
mm2/s. Croton Megalocarpus esters were found to be less volatile than kerosene fuel.
The density of the croton methyl ester was found to be higher than that of kerosene and
automotive diesel. The heating value of the esters was lower compared to kerosene and
diesel.
The esters of Croton Megalocarpus Hutch were further blended with kerosene in ranges of 510%
on volume to volume ratio. Blend of 10% biodiesel in 90% kerosene demonstrated the
most ideal properties with viscosity, density same as that of kerosene. The methyl esters were
further tested in a multi-wick stove following standard water boiling test (WBT) and their
performance in terms of time to boil, heat transfer efficiency, power output, specific fuel
consumption CO, CO2 and particulate matter emissions.
The esters burnt with odorless and non-pungent smell. Biodiesel blends took more time to
boil and consumed more fuel by weight, than kerosene to boil 2.5 liters of water. Heat
transfer efficiency for esters was lower than for kerosene during boiling phase while specific
consumption for the esters was higher than kerosene. Biodiesel blends produced more
particulate matter and CO2 compared to kerosene, while CO was higher in kerosene than
biodiesel blends.
Publisher
University of Nairobi
Description
Thesis